Electrolux Professional | TD6-20HP 20kg Dryer
TD6-20HP
Enquire about this product
Electrolux Professional | TD6-20HP 20kg Dryer
Capacity
20 kg
Drum Volume
360 L
Rated Input
6.5 kW
Heating Type
Heat pump
The Electrolux Professional TD6-20HP Heat Pump Dryer is a high-capacity commercial dryer designed to combine strong productivity with significantly reduced energy use. With a rated capacity of up to 20kg and a 360-litre drum, it is suited to busy commercial laundries handling larger volumes of linen.
Unlike the standard TD6-20, the TD6-20HP uses heat pump technology rather than electric, gas or steam heating, delivering up to 62.5% energy savings. Its reversing drum promotes even drying while helping minimise wrinkles and drying time, and the horizontal lint filter drawer is positioned for easy day-to-day access and cleaning.
The TD6-20HP has a 6.5kW rated input and achieves a listed full-load drying time of around 44 minutes under Electrolux Professional test conditions. Optional OnE Laundry connectivity enables remote performance monitoring, while Moisture Balance helps stop the cycle at the right time to reduce unnecessary energy use and over-drying.
Its heat pump configuration also removes the need for the conventional exhaust ducting required by vented dryers, providing greater flexibility when planning commercial laundry installations.
- 20kg commercial drying capacity
- Heat pump technology delivering up to 62.5% energy savings
- 6.5kW rated input
- Moisture Balance technology
- Optional OnE Laundry connectivity
- No conventional exhaust duct required
What is the capacity of the Electrolux Professional TD6-20HP?
The TD6-20HP has a rated capacity of up to 20kg with a 360-litre drum, making it suitable for larger commercial laundry loads.
How is the TD6-20HP different from the standard TD6-20?
The key difference is the heating system. The standard TD6-20 is available with electric, gas or steam heating, while the TD6-20HP uses heat pump technology, which Electrolux Professional states can reduce energy use by up to 62.5%.
Does the TD6-20HP require an exhaust duct?
No. The heat pump configuration does not require the conventional exhaust ducting associated with vented dryers, which can simplify installation in locations where ductwork is difficult or costly.
How long does a full drying cycle take?
Electrolux Professional lists a full-load drying time of approximately 44 minutes under its test conditions, based on a 1:22 load of 100% cotton at 50% initial moisture dried to 0%.
Is professional installation required?
The Electrolux Professional TD6-20HP 20kg Heat Pump Dryer should be professionally installed to ensure the electrical supply, condensate drainage and machine setup are completed correctly for safe and reliable operation. Ask our team for a quote.
Where is the Electrolux Professional TD6-20HP Dryer suitable for?
The TD6-20HP is designed for high-volume commercial laundry environments, making it well suited to hotels, healthcare facilities, aged care, commercial laundries and other on-premise laundry operations where energy efficiency, capacity and reliable throughput are important. Its heat pump design also makes it suitable for sites where conventional exhaust ducting is impractical.
Looking for a smarter laundry solution?
Call our commercial laundry specialists on 1300 742 427 or submit an enquiry today.
